AC Schnitzer RS adjustable suspension for BMW M4 G82 with rear wheel drive (3130387610)

for M4 Coupé G82, M4 Competition G82
- for vehicles with rear wheel drive
- adjustable in height continously and adjustable bump and rebound
damping
- Elimination of the adaptive damper function

lowering FA ca. 25 - 35 mm
lowering RA ca. 25 - 35mm
Scope of delivery:
- 2 x dampers for the front axle
- 2 x dampers for the rear axle
- 2 x springs with rubber casing for the front axle
- 2 x springs with rubber casing for the rear axle
- 2 x helper springs
- rear axle intermediate ring
- hook wrench
- 2 x adjusting wheels for adjusting the rear axle dampers
- electrical kit for deactivating the adaptive M chassis
- certificate of authenticity
- sticker "Suspension Technology approved on the Nürburgring"
- mounting instructions
- homologation certificate

Philosophy / Technology / Voting
AC Schnitzer's suspension components improve driving dynamics and safety. This requires the wheels to maintain contact with the road at all times, ensuring good roadholding, cornering stability, and braking and steering reliability. "The car's handling must essentially match that of the production car. Smooth load-change responses and gentle understeer at the limit are important—after all, AC Schnitzer customers aren't professional racing drivers," explains Roman Fenners, Head of Development at AC Schnitzer.

With us, every chassis goes through the "Green Hell"
Only when a suspension has achieved optimal results under all conceivable driving and racing conditions and combines sporty handling with the highest possible suspension comfort can it be offered as an original AC Schnitzer suspension spring set, sports suspension or RS coilover suspension. The AC Schnitzer test team is responsible for the exceptionally high product quality of all suspension components. AC Schnitzer suspension components are produced in close cooperation with renowned suspension manufacturers. The special and exclusive AC Schnitzer setup is immediately apparent to the customer. Because only where AC Schnitzer is written on it, you will actually find an AC Schnitzer setup, and this is unique for each model. Since the production models sometimes differ significantly from one another, the engineers have to develop separate suspension components for each model. Vehicle weight, size, engine size and wheel/tire combinations are all taken into account individually. Ultimately, everything must be optimally tailored to the respective vehicle and its characteristics.

Original AC Schnitzer RS ??coilovers: This is fine-tuning down to the last detail.
- Original AC Schnitzer RS ??coilovers are individually adjustable for rebound and compression damping.
- AC Schnitzer offers tested setting recommendations for rebound and compression settings that you can adapt to your individual driving style. You also receive comprehensive fitting instructions.
- Every AC Schnitzer RS ??coilover has been extensively tested and optimized by our suspension team. The AC Schnitzer RS ??coilovers are suitable for everything from normal road use and driver training to racetrack use. An ideal compromise between everyday usability and racing fun.

Greater agility and security
- Large adjustment range in the damper setting, thus the characteristics of the dampers can be optimally tailored to the respective application
- The lowering of the center of gravity through the lowering results in a noticeable improvement in driving dynamics and cornering handling
- The change in the vehicle's center of gravity results in greater safety reserves during evasive maneuvers and load changes, as well as a resulting extension of the driving limit
- The certificate of authenticity guarantees a high safety standard and the best quality
- Developed and extensively tested on the Nürburgring Nordschleife, where every test result is consistently used for improvement
- Increased driving pleasure

Conclusion
The AC Schnitzer RS ??coilover suspension is a true all-rounder, excelling not only on the road but also on the racetrack, as the settings can be individually adjusted to suit individual needs. For ambitious drivers, the AC Schnitzer RS ??coilover suspension offers an emotional and varied driving experience.

Appraise
The parts certificate is an official document that permits the use of tuning parts on public roads under the StVZO (Road Traffic Licensing Regulations) in Germany (and several other countries). After the part described in the certificate has been installed or modified, the vehicle must be presented to an official inspection center. The inspector will verify the correct installation and authenticity of the part and then enter the modification in the vehicle documents. The vehicle's official operating license thus remains valid. The parts certificate is part of the delivery package.

Scope of delivery:
- 2 x shock absorbers for the front axle
- 2 x shock absorbers for the rear axle
- 2 x front axle springs with rubber coating
- 2 x rear axle springs with rubber coating
- 2 x preload springs (helper springs)
- Rear axle spacer ring
- Electrical kit for deactivating the adaptive M suspension
- Adjustment wheel
- Adjustment key
- 2 x adjustment wheels for the rear axle adjustment
- Certificate of authenticity
- Sticker "Suspension Technology approved on the Nürburgring"
- Installation instructions - Parts certificate

Uniqueness of the AC Schnitzer RS ??coilover suspension
- Continuously height adjustable
- Power adjustment in rebound and compression
- Including lowering
- Improved agility
- Increased safety
- Increased driving pleasure
- Road and race track tested
- Large damper adjustment range
- Lowering the vehicle's center of gravity
- Improved cornering
- Improved driving dynamics
- High residual spring travel
- Good ride comfort

Stock Availability

Due to the amount of bespoke orders it is not always possible for us to keep every item in stock at all times. If you require the item urgently please contact us to check stock before purchase.

Call on 01933 685840

Wheels & Tyres

All wheel & tyre packages are special order and cannot be cancelled or returned once purchased.

All in stock wheel & tyre packages come from Germany and have a 2-3 week lead time which includes tyre fitting.

Can I have these parts fitted?

We offer fitting on all our parts.

If you would like your parts fitting please contact us at 

info@ac-schnitzer.co.uk before you order online.

UK Next Day Delivery

We offer UK next working day delivery on all IN STOCK products. Please note all stock coming from Germany can be subject to 2-3 week lead time. Once in the UK these will be shipped UK next working day.

Any lead times longer than this and we will contact you to let you know.