AC Schnitzer wheel 10,0 x 21" AC3 FlowForming "silver-anthracite" offset 40 for BMW X4 G02 (361110213327)

for X4 G02
for rear axle
Scope of delivery:
- rim AC3 Flowforming Silver/Anthracite
- specific hub cover
- quality tag
- homologation certificate
- optional vehicle- and rim-specific mounting and fastening material
- certificate of Authenticity

Philosophy/Design
The wheels establish a car's connection to the road not only physically but also visually. "That's why the right proportions of the rims to the body are so important," explains AC Schnitzer Chief Designer Michele Viandante. "Wheels that are too small can quickly make a vehicle appear long-legged and unstable." The AC3 Flowforming rims achieve what initially seems contradictory: reducing weight while simultaneously increasing the wheel diameter. The AC3 Flowforming rims measure 9 or 10 x 21 inches. Two color variants are available: BiColor Silver/Anthracite or Matt Anthracite. Visually, the rims are clearly part of the AC3 rim family and complement the portfolio in terms of size, application areas, and manufacturing processes. The lower weight of the AC3 Flowforming rims reduces the vehicle's unsprung mass by approximately 10 kg, thereby also lowering the vehicle's CO2 emissions. At the same time, there's also a noticeable improvement in driving dynamics, as the centrifugal forces on the axles are reduced by approximately four times – a perceived 40 kg. The AC Schnitzer AC3 Flowforming wheels therefore offer real advantages: for the driver and the environment.

material
Only high-quality aluminum alloys are used. The material is additionally heat-treated during the production process, resulting in increased strength while simultaneously reducing weight. Material samples are taken during the manufacturing process to ensure consistent, high quality.

production
The flowforming process is one of the most advanced manufacturing technologies in the wheel industry. In this production process, after the actual aluminum casting, the raw product is further processed by rolling it out. This step serves to compact the metal, which guarantees greater stability and impact resistance of the rim. On the other hand, the improved stability also allows for even more intricate wheel designs, as the wall thicknesses can be significantly thinner than those of conventionally manufactured rims. And this is measurable: compared, for example, with the BMW "Double Spoke 706 M" forged wheel for the M5, which, at 10.5J x 20", is even one inch smaller than the new AC3 Flowforming wheels, these are 2.4 kg and 2.5 kg lighter, respectively, than the BMW rim.

BiColor surface
In this process, the wheel is first primed and then completely painted. The surfaces that will later have a metallic gloss are then machined. Finally, a two-layer clear coat is applied, consisting of a polyester primer and an acrylic clear coat.

Test procedures / safety
After their design, the first sample rims are manufactured under real production conditions. These must undergo a multitude of tests. Among other things, their strength is tested. The bending test simulates the "rim lifespan." Every AC Schnitzer rim must survive this lifespan unscathed in order to be produced and sold. Vehicle-specific tests, including test installations with clearance measurements and driving tests on public roads and racetracks, follow. Only after these procedures do our rims receive homologation, i.e., approval for use on public roads. Wheels are safety-critical components. Therefore, they are inspected and tested with the utmost care. This begins with initial chemical material tests and concludes with rigorous endurance tests on test machines: - §30 StVZO wheel guidelines - ECE R124 - Bending tests - 90° impact test - Rolling tests

Scope of delivery:
- AC3 Flowforming BiColor Silver/Anthracite rim
- Hub cap
- Quality tag
- Certificate
- Optional vehicle and rim-specific mounting and fastening material
- Certificate of authenticity
- Care instructions

Uniqueness of the AC3 Flowforming rim:
- Weight optimized
- Developed exclusively for BMW vehicles
- Integrated AC Schnitzer logo
- Open design in BiColor Silver/Anthracite, which allows a direct view of the brakes
- Engineered in Germany
- Compatible with the standard RDC system
- Also available as a complete wheel set
- 2-year warranty - Production monitored according to ISO standards
- BiColor Silver/Anthracite optionally also in matt anthracite
- KDS mount for wheel alignment according to BMW specifications is available
- Spacers / fitting package for the best possible position in the wheel house (to be ordered separately)
- Vehicle-specific fitting package

Stock Availability

Due to the amount of bespoke orders it is not always possible for us to keep every item in stock at all times. If you require the item urgently please contact us to check stock before purchase.

Call on 01933 685840

Wheels & Tyres

All wheel & tyre packages are special order and cannot be cancelled or returned once purchased.

All in stock wheel & tyre packages come from Germany and have a 2-3 week lead time which includes tyre fitting.

Can I have these parts fitted?

We offer fitting on all our parts.

If you would like your parts fitting please contact us at 

info@ac-schnitzer.co.uk before you order online.

UK Next Day Delivery

We offer UK next working day delivery on all IN STOCK products. Please note all stock coming from Germany can be subject to 2-3 week lead time. Once in the UK these will be shipped UK next working day.

Any lead times longer than this and we will contact you to let you know.